新入荷再入荷

Kijima 219-5130 LED Turn Signal Lamp MAT Type M10 2.0 x 1.5,Amazon.com: TRUE MODS 4pc 2,Raxiom Axial Series Sequential Turn Signal LED Side Marker,G5530 - Double-Face LED Stop Tail Turn Light with Side Marker,2pcs 4.5'' Red Square Brake Turn Signal Tail Light Flatbed

• Set of 2
• Mounting screw diameter: 0.4 inches (10 mm)
• Body Size: 2.0 x 2.0 x 1.3 inches (50 x 50
• (E-Mark certified)

Product Description

LED turn signal lamp MAT type. Mounting screw diameter 0.4 inch (10 mm) Body Size: 2.0 x 1.4 x 1.3 inches (50 x 37 x

Indications

When installing a Kijima LED turn signal, please use a separate Kijima IC turn signal relay (set of 4 included). If the indicator for turn signals is 1 light and filament valve type, the indicator will flash both left and right simultaneously. Unplug valve or remove wiring. When using the indicator, please use the indicator connection kit (304-0521¥2625) (sold separately). (However, if the indicator uses a 2-light (separate circuit) vehicle or LED indicator, it can be used as is. In addition to IC relay for use on AC vehicles such as Honda APE etc., an AC/DC adapter (all turn signals are limited to LEDs). Does not support the original position function. Use our Position Kit with separate circuits. The front turn signals have a center distance of over 9.8 inches (250 mm) and the rear turn signals have a center distance of 5.9 inches (150 mm). Also, the color of the lens is orange color, the area is 7 cm or more, and the number of flashes is more than 60 rotations per minute, and the number of times should be less than 120 times. Product information such as compatibility and specifications are as of February 2012. Please check the manufacturer's catalog, the manufacturer's website, etc. for further information. (http://www.tk-kijima.co.jp/)